Wright Stander Intensity Stand-On Mower | Up to 42" Deck & Kawasaki FX600
Wright Stander Intensity Stand-On Mower | Up to 42" Deck & Kawasaki FX600
If you're unsure about fitment or intended use, please contact us before purchasing. Product images are for reference only and may show multiple models, configurations, engine options, deck sizes, or colors.
Pickup available at 1495 Northwest 111th Avenue
Usually ready in 24 hours
Wright Stander Intensity (Stander I)
The Wright Stander Intensity, also called Stander I, is a compact commercial stand-on mower for confined properties and detailed mowing. A narrow chassis, low center of gravity and operator platform between the wheel motors support balanced handling.
Features
- Kawasaki engine: Commercial power with electric starting.
- Compact decks: Manufacturer-listed 36- and 42-inch configurations.
- Suspension platform: Cushions rebound without routine platform lubrication.
- Hydraulic drive: Hydro-Gear pumps and Danfoss wheel motors.
- Aero-Core deck: Floating side-discharge design with maintenance access.
- Quick-Cut adjustment: Quarter-inch height steps; see the specification range below.
- Floating engine and deck: Move together to help limit belt wear.
- Fuel tank: 5.5-gallon capacity.
- Deck leveling: Adjustable to fine-tune the cut.
- Caster bearings: Sealed to reduce maintenance.
- Platform position: Located between the wheel motors for balance.
- Compact casters: Help maneuver around confined areas.
- Serrated deck edge: Helps gather grass along the cutting edge.
Technical specifications
Manufacturer-listed configurations. Match the complete SKU to your selected mower.
Configuration comparison
| Specification | 36 IN | 42 IN |
|---|---|---|
| SKU | WSTN36SFX600E1B | WSTN42SFX600E1B |
| Maximum acres per hour* | 2.98 | 3.48 |
| Blade length | 18 IN | 21 IN |
| Weight | 717 LB | 740 LB |
| Overall length | 62.00 IN | 70.00 IN |
| Width — deflector down | 49.50 IN | 55.00 IN |
| Width — deflector up | 36.50 IN | 42.50 IN |
Swipe the table sideways on small screens. *Manufacturer-listed maximum productivity; actual output depends on conditions.
Shared specifications
| Engine manufacturer | Kawasaki |
|---|---|
| Engine model | FX600E |
| Rated power | 19 HP |
| Category | Stand-On |
| Class | Heavy-duty |
| Generation | Gen 1 |
| Operator controls | Quad Lever Ball Bearing |
| Hour meter | Digital |
| Starting | Electric |
| Forward speed | 8.2 MPH |
| Reverse speed | 3.5 MPH |
| Fuel capacity | 5.5 GAL |
| Drive type | Hydro |
| Wheel motors | Danfoss 12 cu in |
| Hydraulic pumps | Hydro-Gear 10 cc |
| Deck type | Floating-side discharge |
| Deck configuration | Aero Core |
| Deck lift | Quick-Cut |
| Blade count | 2 |
| Minimum cutting height | 1.5 IN |
| Maximum cutting height | 5 IN |
| Deck steel gauge | 7 Gauge |
| Spindles | Ductile Iron |
| Caster tire type | Flat Free |
| Caster tire diameter | 11.00 IN |
| Caster tire width | 4.00 IN |
| Caster rim diameter | 5.00 IN |
| Rear tire ply | 4 ply |
| Rear rim diameter | 10.00 IN |
| Rear tire diameter | 18.00 IN |
| Rear tire width | 8.50 IN |