Wright ZTS Zero Turn Mower | Up to 61" Deck, Suspension & Kawasaki FT730
Wright ZTS Zero Turn Mower | Up to 61" Deck, Suspension & Kawasaki FT730
If you're unsure about fitment or intended use, please contact us before purchasing. Product images are for reference only and may show multiple models, configurations, engine options, deck sizes, or colors.
Pickup available at 1495 Northwest 111th Avenue
Usually ready in 24 hours
Wright ZTS Zero Turn Mower
The Wright ZTS is a commercial zero-turn rider with independent front suspension and an adjustable suspension seat. Available with 52- and 61-inch decks, it combines operator comfort with accessible service points for everyday landscaping work.
Features
- Front suspension: Lets the deck follow the front wheels over uneven ground.
- Kawasaki engine: 24 HP FT730V with canister air filtration.
- Parking brake: Integrated into the hand controls.
- Hydraulic drive: Hydro-Gear ZT3400 transaxles.
- Suspension seat: Adjustable seat with additional spring isolation.
- Aero-Core deck: 52- or 61-inch cutting width.
- Lighting: Standard headlight; corner-pod lights are optional.
- Drive tires: 24-inch rear tires.
- Fuel tank: 7.5-gallon capacity.
- Transport: Front and rear tie-down points.
- Electrical system: Single-relay, single-fuse layout.
- Cutting height: Vertical selector covering 1.5–5 inches.
- Belt drive: Oversized pulleys, compression spring and dual belts.
- Protection: Underbody plates protect engine and hydraulic components.
- Operator conveniences: 12-volt accessory outlet and phone pocket.
- Caster bearings: Sealed design without grease fittings.
Technical specifications
Match the full SKU to your selected deck and engine configuration.
Configuration comparison
| Specification | 52 IN FT730V |
61 IN FT730V |
|---|---|---|
| SKU | WZTS52SFT7301B | WZTS61SFT7301B |
| Maximum acres per hour* | 5.25 | 6.16 |
| Blade length | 18 IN | 21 IN |
| Weight | 1160 LB | 1210 LB |
| Overall length | 84.00 IN | 83.00 IN |
| Width — deflector down | 64.50 IN | 73.50 IN |
| Width — deflector up | 52.00 IN | 61.00 IN |
| Rear tire width | 9.50 IN | 12.00 IN |
Swipe the table sideways on smaller screens. *Maximum acres per hour is the manufacturer’s estimate; actual productivity depends on conditions.
Shared specifications
| Engine manufacturer | Kawasaki |
|---|---|
| Engine model | FT730V |
| Rated power | 24 HP |
| Category | Mid-Mount |
| Class | Heavy-duty |
| Generation | Gen 1 |
| Operator controls | Over the lap controls |
| Hour meter | Digital |
| Starting | Electric |
| Forward speed | 10.0 MPH |
| Reverse speed | 4.5 MPH |
| Fuel capacity | 7.5 GAL |
| Drive type | Hydro |
| Deck type | Floating-side discharge |
| Deck configuration | Aero Core |
| Deck lift | Quick-Cut |
| Blade count | 3 |
| Minimum cutting height | 1.5 IN |
| Maximum cutting height | 5 IN |
| Deck steel gauge | 7 Gauge |
| Spindles | Ductile Iron |
| Caster tire type | Pneumatic |
| Caster tire diameter | 13.00 IN |
| Caster tire width | 6.50 IN |
| Caster rim diameter | 6.00 IN |
| Rear tire ply | 4 ply |
| Rear rim diameter | 12.00 IN |
| Rear tire diameter | 24.00 IN |
| Transaxles | Hydro-Gear ZT3400 |